Quality & Certifications
Quality & Certifications
Emisshield's claims are verified outside Emisshield. The technology was developed at NASA and recognized by induction into the Space Technology Hall of Fame in 2021; its material properties are measured by independent laboratories; and its in-plant results are confirmed by third-party audits and controlled comparisons against uncoated units. This section holds that evidence.
Documented
- 500+
- Facilities coated worldwide
- Up to 15%
- Fuel savings
- 5 to 15%
- Production gains
- Under a year
- ROI, typically
02
What specifications define the product?
Emissivity 0.85 to 0.95, constant to 3,100°F (1,700°C) · adhesion above 5,000 PSI (345 bar) · thermal shock -392°F to 2,732°F in 3 seconds, no failure · applied at 2.0 to 4.0 mils · water-based, non-hazardous chemistry · manufactured in Blacksburg, Virginia, USA (40,000+ gallons a year capacity).
How is every project verified?
Each project starts with an engineering questionnaire and a baseline, and ends with measurement against that baseline, with an uncoated control unit where one exists. That process is why the Case Study Library carries measured before-and-after figures rather than estimates.